Established in the year of 2012, Resonance Automation & Machines are engaged in manufacturing offering an enormous consignment of Environmental Chamber, Fuel Tank Testing Machine, Food Processing Machine, Digital Oven, Medical Equipment and Chambers and Material Strength Testing Machine. Manufactured making use of supreme in class material and progressive tools and technology, these are in conformism with the guidelines defined by the market.

Nature Of Business

Type Of Venture

Year Of Establishment

Turnover

Banker

GST Numnber

PAN

Import / Export License

RESONANCE AUTOMATION AND MACHINES

Address: Plot No. 1131, Hari Encalve, Kirari Suleman Nagar, Near Hari Hospital, Sultanpuri, New Delhi-110086, Delhi, India, Delhi, India


  Umardin Saifi


RESONANCE AUTOMATION AND MACHINES

Address: Plot No. 1131, Hari Encalve, Kirari Suleman Nagar, Near Hari Hospital, Sultanpuri, New Delhi-110086, Delhi, India, Delhi, India


  Umardin Saifi

RESONANCE AUTOMATION AND MACHINES
RESONANCE AUTOMATION AND MACHINES
Contact Information

Address: Plot No. 1131, Hari Encalve, Kirari Suleman Nagar, Near Hari Hospital, Sultanpuri, New Delhi-110086, Delhi, India, Delhi, India

  Umardin Saifi

6
Post
7
Listed In



Photos
View All
Salt Spray Chamber

RESONANCE AUTOMATION AND MACHINES@ Umardin Saifi +919990770129 SALT SPRAY TEST CHAMBER (FOG METHOD) The equipment has been designed suitably for evaluating the corrosion resistance of the surface treatment of metallic material by salt spray test method in accordance with ASTM B117, JIS Z 2371 and shall satisfy the test condition as follows. 1. The material of the test chamber shall not be corroded itself. 2. The atomizing nozzles shall not atomize directly on the test piece. 3. The drop and solution accumulated on the ceiling shall not drip on the test piece. 4. The solution dripped from the test piece shall not be used for test again. 5. The spray pressure shall be kept at between 0.7 and 1.1 Kg/cm2. 6. The exposure zone of the salt spray chamber shall be maintained at 35 ± 10C. CONSTRUCTION It consists of a test chamber, an air saturator, a solution supply tank, a control panel. Specially designed glass atomizers employing compressed air from supply line through filter regulator produce the salt spray. Control valves can adjust the air pressure for spraying and agitation of salt solution. The air from the compressor is connected to the chamber through air filter, pressure regulator and a saturation tank through which the air is bubbled & heated up electrically to maintain the temperature inside the chamber constant at 350±10C by means of a digital temperature controller. The saturation tank supplies a heated, humidified clean air for atomization of the solution. It consists of a stainless steel tank, a heater, a bubbling nozzle, an air cleaner, a pressure regulator and a pressure gauge.

Salt Spray Chamber Manufacturer

RESONANCE AUTOMATION AND MACHINES@Umardin Saifi +919990770129 SALT SPRAY TEST CHAMBER (FOG METHOD) The equipment has been designed suitably for evaluating the corrosion resistance of the surface treatment of metallic material by salt spray test method in accordance with ASTM B117, JIS Z 2371 and shall satisfy the test condition as follows. 1. The material of the test chamber shall not be corroded itself. 2. The atomizing nozzles shall not atomize directly on the test piece. 3. The drop and solution accumulated on the ceiling shall not drip on the test piece. 4. The solution dripped from the test piece shall not be used for test again. 5. The spray pressure shall be kept at between 0.7 and 1.1 Kg/cm2. 6. The exposure zone of the salt spray chamber shall be maintained at 35 ± 10C. CONSTRUCTION It consists of a test chamber, an air saturator, a solution supply tank, a control panel. Specially designed glass atomizers employing compressed air from supply line through filter regulator produce the salt spray. Control valves can adjust the air pressure for spraying and agitation of salt solution. The air from the compressor is connected to the chamber through air filter, pressure regulator and a saturation tank through which the air is bubbled & heated up electrically to maintain the temperature inside the chamber constant at 350±10C by means of a digital temperature controller. The saturation tank supplies a heated, humidified clean air for atomization of the solution. It consists of a stainless steel tank, a heater, a bubbling nozzle, an air cleaner, a pressure regulator and a pressure gauge.

Fuel Tank Leakage Testing Machine Manufacturer

LEAKAGE TEST RIG FOR FUEL TANK The test rig shall be designed to check the leakage of fuel tank by immersing in water and observing the air bubbles for leakage. The rig meets the following requirements: a) The component is placed in a cage designed to prevent its bulging when clamped pneumatically. b) The cage can move up and down pneumatically inside the water tank immersing the fuel tank under test. c) The cage will be locked automatically by suitably designed s.s. clamps operated by two pneumatic cylinders. d) There shall be provision for rotating the cage ±180º during test time to observe sir bubbles from bottom of the tank of leakage. e) The water tank of suitable size and all wetted parts are made out of stainless steel. f) The water tank will be illuminated from top for better visibility of air bubbles. g) This is one push button operated fully automatic equipment controlled by PLC.

Hot And Cold Chamber Manufacturer In Delhi

umardin saifi 9990770129 Product Code : 05 Product Description Hot And Cold Chamber is acclaimed for its cost effective maintenance, sturdy construction and reliability. It finds best usage in automotive industry for precise testing of automobile parts such as engine and steering. Also, it is suitable for working on rubber, plastic as well as metal parts. It can be switched from from us one state to another such as hot to cold. Besides, the offered Hot And Cold Chamber can work over wide range of temperature from -10 to 100 degree C.


Scan here
to download