Automatic door recommended for lifts being used at public buildings handling high traffic. Though they require more space in building as compared to manual doors, it is advisable to go for automatic doors. There is not need for a lift operator. The door panels can be designed to all to the décor of the building. The range of lifts available is from 4 persons to 40 persons. The speed of travels ranged from single speed of 0.7m/s to variable speed of 1.5m/s. the cabin walls door panels can be of M.S. Powder coated or Hairline brush finished stainless steel. Glass doors can also be provided but are expensive, Normally centre opening doors are advised due to their ease of elegance, however in places with size constraint, telescopic doors can also be provided in which both the doors open towards one side. Our lifts use programmable Logic, Controllers with auto fault display and detection capability. Modern amenities like variability speed through ACVVVF drives, Automatic rescues device for electricity failure, Load weighting d NOTES Machine Room Height ‘M’ – 2430 Pit Depth ‘P’ – 1650 Overhead (F.F.L of highest floor to Machine Room Bottom) ‘O’ – 4850 Any number of floors can be served. The Side elevation shows only the Top Floor & Bottom Floor for the respective height requirements. All Door height will be 2000mm clear Pain for Manual Swing doors / Collapsible doors / Telescopic doors is different. All sizes are inside finished dimensions in mm. All Hoist way walls are 230 mm thick Brick or 150 mm RCC walls CLINET’S SCOPE Entire Civil Structure for the lift shaft including plastic & painting of lift shaft inside. Three Phase Electric Supply Scaffolding during left erection Provision of sill support, machine support, lifting beam hook, pit ladder etc Grouting of our holdfasts, Push button Boxes, Door Frame member, etc Machine room will be extended beyond the lift shaft so that machine is approachable from three sides fro maintenance